¡ôWhole Line/process from raw paper to finished paper products(paper cups,paper bowls,paper buckets)....

1>>>Raw rolling paper: You can get the raw paper from the paper factory(Suppliers). 2>>>PE Film Coated Sheet Paper:(one side or two sides PE coated) 3>>>Pre printed sheet paper: 4>>>Cup-fan-wall body 5>>>Finished Paper cups Coating Machine coating PE film on raw paper Slitter Machine :slitting PE coated rolling paper to sheet paper or cup-bottom rolling paper. Printing machinery:pre-printing pattern or design on sheet paper. Creasing and cutting machine : Cutting the sheet paper to cup-fan-wall body Paper cup machine : Forming the paper cups (Feed the cup-fan-wall body and rolling bottom paper to the entrance,then it auto forming the cups,) one operator is enough .

>>>Explication:

1.) From the above :total prcess are:raw paper>>coating PE fiim>>slitting rolling paper to sheet paper or bottom rolling paper>>pre printing on the sheet paper>>cutting the printed paper to cup-fan-wall body>>>cup forming machine>>>Packaging the finished paper cups in box or bags. 2.) The Paper supplier supply the PE coated paper ,and some of them offer the service of pre printing ,and pre cutting.So you can get the cup-fan-wall body from the paper supplier. 3.) You also can buy a die cutting machine,and do this process by yourself. 4.) If you want to do the printing step: you can select the offet printer or felxo printer,and other printers can be used on the PE coated paper. Suggestion: It was three working procedure that paper cup,paper bowel was made from raw and processed materials (paper) to merchandise (shaping paper cup,paper bowel):printing, mould cutting ,moulding,but it only takes two processed from paper food box:mould cutting,moulding. Presently,most investors ask outside to finish printing and mould cutting at the beginning,except that large scale manufacturers accomplished all processes independently. one It would reduce investment ,the other strengthen the print technology specialization. It is asked to ensure the quality of products by professional press; At last,the speed of one printing machine and plain scoring machine can match four paper forming machine,or it would lead to leave equipment unused. For above-mentioned reasons:we suggestted investors to do only forming processes ,and relegate printing and mould cutting to nearby press. the two processes is no influence basically to profit,because the needful expense for them is only account ror less than 1/20. Certainly,it is much better for you to product greatly,or do by yourself,this can reduce middle tache and increase production efficency. There was suppliers to plain scoring machine,offset point machine at Jiangsu, Shanghai, Zhejiang,etc.and they all keep cooperation with our factory,Meanwhile,we can introduce them to you if you need.